To find out about o ur business and what we do, Please click:- HE RE To go to our Page The Better Audio Company Presents :- The Better Audio Company flexible Tonearm Interconnect "Flexconnect" (1.2M stereo pair) for SME or tonearms with phono sockets. This has been designed to work with the SME Series III, IIIS, M2 (all models), 3009 / 3012 series (only where the base has been upgraded to phono sockets). The "Flexconnect" comprises :- 2 lengths of genuine Cardas 4x33 A.W.G. with shield tonearm cable. 4 x Neutrik Rean phono plugs 1 length of extra flexible, O.F.C. copper cable (for the Earth cable). 2 x wide area forked spades. All soldering is done using genuine Cardas Quad Eutectic Solder. Taking into consideration that the Cardas cable which I sell separately, would have a total cost of around £80 (not including the earth cable and spades or phono plugs), the asking price is reasonable considering the time it takes, and the skill required to make this super cable system. This is designed to work with these arms and, in particular, for the use on suspended sub-chassis decks such as the Linn Sondek, Thorens, or Michell, and have been wired in a "pseudo" balanced style , i.e. 2 cores have been soldered to the middle pin, 2 cores have been soldered to the screen pins and the external braid has been soldered to the screen pin at one end only ; This screens the audio signal from RF and external EMI , but is not carrying the audio signal from plug to plug. The external earthing is carried out by the extra-flexible cable that comes with this cable system. The phono plugs have the red and black channel identification at one end only, to indicate the end that the screen is connected to, and should always be connected at the amplfier end. The internal signal wires are braided together to help cancel out crosstalk. The internal structure of the signal wire are of the "litz" type, each strand in the conductor being coated with insulation, so it cannot make electrical contact with it's adjacent strand, leading to clearer reproduction, and better focus to instruments. The "pseudo" balanced wiring reduces the noise floor considerably, and you will notice that the background to your music is so much quieter, which in turn, makes quieter passages easier to listen to. The Earth cable is made of extra-flexible, silicon covered, O.F.C. cable and is terminated using wide area forked spades (for better contact) ; This is made longer than the interconnects in case the earth post is not right next to the phono sockets of your amplifier. This will compliment your tonearm perfectly and will offer a great improvement in sound quality over the stock cable, which, will enable your tonearm and cartridge to show you what they can really do ! ! . Please also check out my other BAC and Cardas Items that I have for sale. You will not be sorry with your purchase or in my service to you. Happy Bidding !
|